AEMME UniFiber Primer 2.5L

UNIFIBER PRIMER is a one-component primer designed for low-thickness direct application on fibreglass boat bottoms. It is also recommended as a primer before antifouling paint or as a tie-coat between epoxy or polyurethane two-component paints and one-component finishes. The primer can be overcoated with TOPKAPI enamel for topside and superstructure finishes, or with a suitable antifouling paint for the hull bottom. Usage Instructions: Clean the surface thoroughly, degrease with a suitable detergent, rinse with water, and lightly sand with fine abrasive paper. Remove all dust. Apply 1 coat of UNIFIBER PRIMER and let dry 6–8 hours. After 24 hours, apply 1 coat of intermediate undercoat and let dry as recommended. Sand the surface lightly after 6–8 hours, then finish with 2 coats of the recommended one-component topcoat enamel for topside and superstructures, or 2 coats of antifouling paint for the bottom.
21.000 KWD

Technical specifications

Other specifications

Warranty
0 months
Length
0.0 cm
Width
0.0 cm
Height
0.0 cm
Weight
0.0 kg
Information on technical characteristics, the delivery set, compatibility, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Menu